Аппарат для маникюра и педикюра kads купить

Аппарат для маникюра и педикюра kads купить

What cutters are needed for hardware manicure

Manufacturers offer a very wide range of nozzles of different form. Each of them is intended strictly to solve certain tasks. The master who plans to make manicure by a professional apparatus should have at least 5-8 different cutters. Ideally will need a large set of nozzles with varying degrees of grain. Find out what better to buy cutters for manicure and how they apply.

Needle

This nozzle is also called the "fissure milling cutter". It is used when working out side rollers, cuticles. Many masters use a needy tool for removing gel varnish, correction of artificial nails. He relieves the detachment of the abnormal coating well, perfectly copes with dead skin, leaving behind a smooth surface. It is best to buy diamond cutters needles.

Cone inverse

Boroma of this bizarre form is treated with a free edge of the nail and some types of corns, lifting the cuticle. The tool is convenient to cook artificial nails to the correction of the French manicure. Delta manages to make smooth, and the free edge is as thin as possible. As a rule, cutters in the form of a reverse cone are made of moderately soft materials. There are different abrasives.

Ball

This nozzle is used to process the hard-to-reach sections of the nail plate. She else drills corn, small cracks. Some craftsmen use spherical nozzles to remove damaged skin cells, located as close as possible to the nail plate and for cleaning the side rollers. For hardware processing of large sections of a milling ball, use it is inconvenient.

Cylinder Rounded

This cutter for nails is universal. The scope of application depends on the material of the manufacture. It is used for hardware processing both nails and drilled skin, interfallated gaps. Softy cylindrical cutters are used to polish nail plates. But the nozzle in the form of a straight cylinder is used to remove the layer of simulating material. Cutters with rounded ends recommend using novice masters.

Flame

The nozzle of such a form is designed for hardware processing of coarse side rollers, removal of artificial nails. It is also used to drill in an artificial nail to the holes under rhinestones or through holes for piercing. When the pedicure is performed, the fir-fledged heat alloy flame is suitable for removing the thickened cuticle, Pesigi. Experienced masters you can try to disclose shallow cracks by it.

Cone

Such nozzle is used to study the zone between the nail plate and the skin roller. The greatest amount of cut-shaped cutter - polishing. They are made of soft material, for example, plastic or silicone. Cones cutters are very useful to use novice masters to catch up with skills. It is preferable to have options for all degrees of rigidity.

Cylinder pointed

The tool of such a plan is suitable for hardware processing of rollers and sinus disclosures. It is preferable to use experienced masters, because beginners can inadvertently injure the client. A person who knows how to make a hardware manicure and pedicure, will be able to shorten the free edge of the nail with them, give it a form, remove artificial coverage and perform many other tasks.

Frustum

The nozzle of such a plan is processed by nails from artificial materials to give them a certain form. It is preferable that it is diamond. Due to the specific form of the cut-cone, the nails are minimally undergoing negative effects and the result is maintained for a long time. Nozzles from softer materials are designed for grinding and polishing a natural nail plate.

Types of cutter for hardware manicure

Nozzles differ not only in shape, but also by manufacturing material, which significantly affects the price. They are made of ceramics, corundum, tungsten, solid alloys, carbide, steel, with diamond spraying. Not only cost, but also quality of work, durability, list of applications depends on the material. Find out which cutters are preferable to buy or order in the online store with mail in Moscow, St. Petersburg, other settlements.

Ceramic

Nozzles for hardware manicure from such a material are gently removed to the cuticle, suitable for giving the nail to one or another. They are safe and soft, do not overheat and are not clogged with dust, but quickly wear out. The fine-grained fit for grinding of the skin and working with the nail plate, they are moderately treated with the cuticle, and they remove the burritable particles. Example:

  • model name: HDFREZA, ball, average degree of treatment, 505 001 190 050;
  • price: 1800 rubles;
  • characteristics: Ball with double cruciform cutting for hardware manicure, treating deep cracks, corns removal;
  • pros: Durable;
  • cons: Dear.

To work, each wizard needs several bors. It is advisable to buy such:

  • model name: 600.198.220.016, needle, 1.6 mm;
  • price: 590 r.;
  • characteristics: Large cruciform cutting, for hardware manicure, with a shortened tail;
  • pros: Suitable for neat removal of gel varnish, does not heat;
  • cons: quickly erased.

If you often work with gel lacquer, purchase the nozzle-flame. Description:

  • model name: 600.273.140.060, Flame, 6 mm;
  • price: 790 r.;
  • characteristics: Small cruciform cutting for hardware manicure, gel removal and gel lacquer, treatment of natural nails, hopes;
  • pros: ideal for nail correction, quickly and gently removes acrylic, gel;
  • cons: large in size.

Corundic

This is a kind of ceramic cutter, but tougher. They act on the skin gently, durable. Cruddes for manicure are used to remove heat, drilling solid corns, and for artificial nails - the perfect option. They are not very hot. Description of one of the options:

  • model name: Corundum green, cylinder, 0503.002;
  • price: 100 r.;
  • characteristics: Designed for hardware manicure, handling of pads and leather, alignment of the plate after removing artificial materials;
  • pros: durable, moderately soft;
  • cons: Not suitable for acrylic nails.

In his arsenal, grinders will not hurt to have such. Short description:

  • model Name: Grinder Reverse Cone, Medium, 700 R 736 HP 065 625;
  • price: 200 r.;
  • characteristics: Average abrasion, diameter 6.5 mm, Length of the working part of 6.5 mm, for hardware manicure, Correction of thick nails, cuticle processing;
  • pros: many application options;
  • cons: quickly erased.

A grinding mill, with the description of which you now familiarize yourself, will not be aligned with any wizard. Intelligence:

  • model name: grinder, truncated cone, thin, 700 R 649 HP 025 655;
  • price: 220 p.;
  • characteristics: The diameter of the working part is 2.5 mm, length is 6 mm, the abrasion is thin, to correct the length of natural nails, processing the cuticle, Pesigi;
  • pros: Convenient in work;
  • cons: short-lived.

Diamond

These are strong and durable bors. Can be used not only for manicure and pedicure of hardware, but also to correct gel or acrylic nails, formation of free edges, grinding side rollers, corns, spaces between fingers. Universal Option:

  • model name: Muhle Manikure 806 166 021;
  • price: 80 r.;
  • characteristics: Cone Boron, the model is designed for the processing of high side rollers, non-touching cuticle, hard-to-reach places, disclosures and grinding cracks, 3 degrees of abrasiveness;
  • pros: versatility;
  • cons: It is difficult to choose the desired degree of processing.

A very effective in the work will be the following model of the average degree of processing. Description:

  • model name: HDFREZA 807 112 040 GOLD;
  • price: 1570 r.;
  • characteristics: The diameter of the working part 3 mm, length 1 cm, with a gold coating, to remove part of the nail plate, the removal of a holopal, from a sintered diamond;
  • pros: It processes well, suitable for the diabetic foot, low trauma, fast slip on the surface;
  • cons: High cost.

Small milling mills are indispensable in work. If you are looking for such, pay attention to this option:

  • model name: 277.524.018 Flame;
  • price: 65 p.;
  • characteristics: 1.8 mm, average abrasive, for processing cracks, side odds;
  • pros: Durable, cheap costs;
  • cons: With careless handling, it may damage.

Steel

Cuticle from this material is removed from this material. In addition, they are intended for processing the area around the nail plate. Description of one of the options:

  • model Name: HDFREZA 504 R 95 RF 070, Cone Rounded;
  • price: 1750 r.;
  • characteristics: 7 mm in diameter, length of working part 14 mm, for work on thickened natural nails, densities, cans, removal of artificial material;
  • pros: durable, large diameter;
  • cons: Dear.

The steel cutters of the circular shape are actively used to perform a hardware manicure and pedicure. For example, this:

  • model name: Planet Nails Rose Dril 11 RF 012;
  • price: 220 p.;
  • characteristics: Metal, with a crossed notch, 1.2 mm,
  • pros: Safe;
  • cons: Not suitable for too coarse skin.

The next hexagon cutter is not as often, but it is very effective. Description:

  • model Name: One Clean 407 RF 012 Hexagon;
  • price: 715 p.;
  • characteristics: 1.2 mm diameter, for processing side rollers and cuticles;
  • pluses: Reliable, well relieves damaged skin layers;
  • cons: limited applications.

How to choose cutters for hardware manicure

You must have a lot of nozzles so that for each specific type of work you can easily find suitable. Some are suitable for working with natural nails, others with artificial, third - with leather. There are separate tools for removing the cuticle, removal of gel and acrylic, polishing. Choosing the correct nozzle for each type of work, you will provide the highest quality result.

To remove the cuticle

This stage is considered one of the most important both in the hardware manicure and in pedicure. It must be performed purely, efficiently, safely and non-making. For removal of the cuticle, spherical cutters of different diameters are used. Largely move it, and smaller remove the burritable parts. More applied conical nozzles. To remove the cuticle on the nails of the legs, it is preferable to take cylindrical.

Working with the cuticle is best for all nozzles made of high-quality material that provides a soft effect. Carbide cutters and other ceramic are suitable. They cope well with dead skin pieces, make the cuticle perfectly smooth and prevent the formation of a burr. Cocking tools from such a material is impossible.

For removal of gel varnish

For this purpose, cutters are used from different materials. For removal of gel varnish, the most suitable:

  1. Ceramic. Do not heated and not clogged, durable, but expensive.
  2. Carbide milling mills for manicure. Cheap, but greatly warm at small revs.

It is important to correctly choose the abrasiveness of the cutter. No need to take the toughest. It is possible to determine it in color notches. Nozzles with green and black marks are too rude. It is possible to remove the gel varnish or blue ceramic, or red carbide. Yellow cutters for hardware manicure are suitable for beginners. As for the shape of the nozzle, it is best to apply a cylinder, cone and corn, disposable sand caps. Beginners and for home use should be preferred with options with a rounded tip.

To give shape

The choice of cutters for this task is not appropriate. Very good use ceramic, corundum. The free edge is very well handled with a truncated cone, cylinders with a rough surface or braid large notch. Sometimes apply disk nozzles with a large abrasive, but only for unhetric nails. A reverse truncated cone can be used.

For polishing and grinding

These processes are made of mills from materials from moderate to maximum softness. Grind nails with small-grained spraying by naps. The smaller the abrasive - the better. Felt, silicone, cotton, suede, on rubber-based are suitable for polishing. They clean the surface, make it smooth and smooth. It is important to remember that all the nozzles for manicure from soft materials are quickly warmed up, so it is necessary to work with them carefully.

Video

Master of Manicure can offer the client two absolutely different approaches to the creation of a manicure or pedicure. The first is more familiar and like women with their effect is a cutting. The hardware manicure prefers modern European, as it carries a smaller threat of injuries and is more secure. But if the cutters for hardware manicure are incorrectly chosen by the master, then the ability to damage delicate skin increases.

Types of cutter

Machine for manicure can replace many tools that were used earlier in manicure purposes: files, nippers, scissors, bumba. Changing cutters, you can achieve a certain effect, as each nozzle for the Fraser has its own purpose. Rotating, she processes the nail, cuticle, the skin around the nail, etc. The main thing is to know which form to choose for a particular site.

The most necessary mini-set nozzles (for home or as a starting kit for professional use) should include cutters for such purposes: grinding and polishing nail, cleaning it from flap skin, care for cuticle, removal of solid artificial coatings.

The apparatus itself must be turned on to the desired set, which has a standard hole for cutters. Usually, nozzles are suitable for all devices. The leading milling manufacturers are Strong (Strong), Nail Power, Scarlett, Beurar, Irisk, Babyliss, Kads, Vitek, Runnel. Most of these firms are manufactured and components - nozzles (cutters) and caps.

An overview of the devices for pedicure proves that the market is large enough to make the right choice. The dimensions differ them, they look like differently.

For cabin use, the list of cutters is varied, includes nozzles of different shapes and materials.

Needle

The name completely characterizes the shape of the nozzle. She looks like a needle. It often has small abrasiveness, refers to the fissual type of nozzles - penetrates the most hard-to-reach places (removal of Pesrygia, processing of near-gas sinuses, cracks and corns during pedicure and so on). It has gradation of thickness - from 1.2 to 1.8 mm.

It has the form of a cone, which turn the extended part outward. It is used to align the nail plate, grinding small corns, adjusts the shape of the nail. There are varieties with the rounded back, and with even. Popular use in pedicure, as there are various options for the abrasive of this nozzle.

Ball

This nozzle is often called boron, such drills are used in dental care purposes. The varieties of the diameter of the ball (from 1 to 2.1 mm) allow you to make a neat line of the cuticle, are used to handle areas from the nail. Also, the ball can also remove the cuticle, align the cracks and other irregularities of an artificial nail.

Cylinder Rounded

There are different widths. If it is 2.3mm, then it is convenient to handle the side rollers, adjust the shape of the nail plate at the free edge, removing the layer with artificial nails.

If you use 1.6mm, the nozzle is suitable for processing the peel around the nails. Also used to handle a section under the nail after extension. The spherical tip of the cylinder gently believes chicken skin, layers.

Cylinder pointed

It is a cylinder that has a sharp end. Call its "Pulka". This nozzle for the milling is presented to the choice: 1.2 and 1.4 mm. The most popular for nail design, namely, to prepare space for inserting rhinestone or stone.

After increasing gel nails, the cutter will help to align the space under the nail. It is also used in the treatment of the skin around the nail plate.

Flame

The nozzle of almost universal destination. It is similar to the flame candles or an inverted drop. There are varieties in the size of the convex site and tip. Suitable for treating a nail from all sides - cuticle, near-gas rollers, removal of Pesigi, grinding of artificial coating of nails, pedicure.

Cone

Like most other nozzles, has a different diameter with varying degrees of abrasiveness. She can cut over the excess gel when building, make a form. The conical nozzle is suitable when removing the cuticle during pedicure, leather care around the nail.

Good milling cutter for working with artificial nail coatings. Featuring the necessary diameter, you can make a grinding of the gel coating of the nail or acrylic, to remove the shellac layer. Also suitable for leaving the crude nails and skin on the legs, nail form correction.

All the nozzles in the hands of an experienced wizard will give the expected effect. For beginners, the nozzle should be carefully selected depending on the task.

Varieties of milling material

The milling mill laid a lot of responsibilities that he can do not fulfill with one nozzle. Each set task can be solved better if you choose not only the correct form of nozzle, but also the material. You only need to change them on time.

Ceramic

Among the employees of the nail service, the most popular nozzle was called "Corn". It is intended for efficient and safe removal of the gel lacquer. There is a kind of such nozzle for the left. The favorite is both "carrots", which politicically polishes the nail.

The main purpose of the nozzles from ceramics as in the rest is the processing of the nail plate and the peel around it. There are among ceramic species of stiffness. This is a color nozzle. Color means:

  • blue / pink - fine grain;
  • white - average;
  • black - big grain.

Blue / pink can handle the cuticle, the skin around the nail, and the white is designed to remove Pesigi from the nail, shellaka, gels. Black is best to remove the flapped skin (for pedicure purposes), corns. It also removes a dense gel with nails.

Forms of ceramic nozzles are standard, designed for high-quality hardware manicure. Store them should be carefully not to damage the integrity.

The sterilization of the nozzles is obligatory, the ultrasonic sterilizer is better fit (it is capable of clearing all the notes of nozzles).

Corundic

The material of the nozzle is corundum, it is synthetic origin, the structure is similar to ceramics. The nozzle is made of peculiar ceramic crumbs. Such cutters are safe and cannot harm nails or skin even when the master is error.

Used (depending on the form) for different purposes - from processing cuticle before removing the solid coating (for increasing gels). Are considered more durable than ceramic.

The classification of their stiffness is definitely not defined (none of the head, nor on notes on the ground), so the abrasives need to be specified when purchasing.

Diamond

Such nozzles are included in the category "The most necessary" to begin work in the nail service. Among them there are many forms and degrees of abrasiveness, which make it possible to work with them in different directions. The base of the rod is steel, which causes a diamond spraying of natural (solidismal) or artificial origin.

The abrasiveness of the nozzle is distinguished by the color of the notches based on (on the handle):

  1. Yellow notch - marking for the smallest crumb (15 microns);
  2. Red - small crumb (30-50 microns);
  3. Blue is a middle size crumb (90-125 microns);
  4. Green is more rude (125-181 microns);
  5. One black strip is a rough crumb (300 microns);
  6. Two black stripes are very rude (500 microns).

You can rarely meet the nozzle with a white notch - grinding mills. It is also used as a polisher. But these are rarely on sale. With three black stripes, you also need to search. They are necessary in order to remove the coolest skin or remove a dense gel.

Successful spill of the gel of varnish or other artificial coating depends on the notation of the notch. The most popular - nozzles with green and red notches made by Germany. They are considered the best and most qualitative. But the analogues of the German are products of the production of Russia (the company "MONOLIT"). Does not lag in quality and Belarus.

Sterilize cutters conveniently in an ultrasonic wash or tear. Ultraviolet sterilizers only support the cleanliness of the nozzles, but they will not be able to disinfect them completely.

Steel and carbide

Steel milling mills have a lower price than diamonds, but are used for similar purpose. Made from medical steel (carbide and tungsten).

Feature cutters - Figures of notches (straight, oblique, spiral, etc.). Thanks to them, the coarse skin can not be removed with dust, but chips. Among them there is also a form of "corn", which is intended for removing the gel of the varnish.

There are cutters with different notches, about the form of which you can learn from the strips on the base.

When disinfection of steel milling nozzles by any means, they are not amenable to corrosion and do not lose sharpness. Service life - up to 5 years.

Combined

Steel nozzles are in the form of a cylinder - "drum". They have the faces for planting a cap - hexagon, octaigrated. The drum is put on the caps without top of carbide and silicon (sandy). They are performed both grinding functions and polishing.

Plastic or rubber base is planted on the metal rod. For such fundamentals, there are special caps that, after the arrival, you can easily change to a new one. They are disposable. That is, it is not amenable to sterilization and do not apply on several clients.

Caps can be manufactured from different materials, except carbide and silicon - felt, ceramics, silicone.

Silicone

Refer to the category of polishers for natural and artificial nails. The perfect glitter of the nail plate can be given with the help of this one nozzle.

They also differ in abrasiveness: from smooth to rough grinding options. They are made with small particles of abrasive.

Do not put the nozzle with large temperatures, so the ball sterilizer does not fit for sterilization, which will ruin it.

How to choose cutters?

Each nozzle for a milling driver for something is intended and will help achieve the desired result. The technology of making a manicure and pedicure has its own sequence and is executed step by step. In addition to cutting tools, machine mills are used. Cutters for hardware manicure are different, how to choose the desired and not harm nails?

To remove the cuticle

To raise the cuticle, you will need any mill cutter with a blunt end (cone or cylinder). A more successful option will be a corundum nozzle or ceramic.

Remove the cuticle will help the spherical edge of the nozzle, and the remains of Pesigi under the cuticle are removed by pointed tips. Diamond cutters are suitable tools for this.

For removal of gel varnish

Carbide, steel, ceramic cutters have a suitable form for removing gel varnishes: corn, cylinder. These forms are not able to cause damage to the nail plate. Next applied grinding nozzles for the drum.

To give shape

Apply the shape of the free edge of nails will help the nozzle reverse cone, rounded cylinder, truncated cone. Production material - steel, carbide, diamond, corundum cutters.

For polishing and grinding

The cutters from a different material (steel, ceramics, corundum, silicone and other) have such forms that can inhabit the nail and polish it. This is a ball, cylinders, flames. The surface of the hooks for the drum can be made of cotton, felt.

A description of additional means for manicure and pedicure is presented on the Internet very widely. For example, Gevol has a large line of means to ensure additional care to the skin and legs.

How to sterilize cutters?

Disinfect mills necessarily after each client, with the exception of disposable cap nozzles. Since the materials of the nozzles differ, then the approach to sterilization is different.

All cutters before sterilization are treated with disinfecting fluid. Suitable alcohol solution, from manganese or soda. Then they are sent to the sterilizer.

Steel, diamond and carbide nozzles can be sterilized in a dry closet or ultrasonic sink. Ball sterilizers are not convenient for nozzles, since they cannot qualitatively destroy microorganisms in the notches of milling mills.

More "delicate" nozzles made of silicone, felt, cotton sterilize in ultraviolet vehicles. Ultrasonic washing is universal in such cases and is capable of maximizing the surfaces of any cutter.

Each milling cutter performs one stage of the nail hardware processing. Nozzles have a certain relief dictated by their point of application, the purpose of use, each of them cannot be evenly replaced by the adaptation of another form.

Modern nail treatment

- It is the processing of the nail plate and the separation space, performed using an electrical instrument (mill) and rotating cutters. A hardware manicure is carried out without cutting tools - scissors, bruises, trimmers.

Uneven "Skowning" of unwanted peeling around the nail in the process of edging manicure leads to hooks and damage to blood vessels. Electrical nail processing with cutter differs:

  • Low trauma: With the right nazhma, the nozzle spills the horny flakes, not traumating the viable layers of the cuticle with capillaries;
  • Forming a flat line of the nail hole in one touch;
  • The possibility of grinding, storming the cuticle, which is deprived of the edged manicure.

Varieties cutter for manicure and their purpose

Preparatory stage to hardware manicure

Includes removal of artificial coating (top, gel varnish, gel, acrylic for extension) and drying the working surface. At this stage, carbide or ceramic materials are used. Description cutter for hardware manicure:

Processing of Pesrygia and rollers

Which cutter to remove the cuticle at home:

How to remove rough skin

Materials for nozzles

  • Ceramic cutters For hardware manicure. Ceramics is used to remove rough skin of nail rollers, faster than other materials copes with an artificial coating. You can work with nozzles at low speed of rotation (up to 30 thousand revolutions).

Ceramic cutters

  • Carbide varieties of cuttersused when grinding cuticles and side rollers. Gel lacas at the preparatory stage they spill for a long time, but with a low probability of damage to the nail plate. This group includes budget steel mills without notes.

Carbide cutters

  • Diamond devices Contain a natural or artificial diamond crumb. Budget nozzles for beginner masters. Products with natural particles are used in pedicure, roller processing, with artificial - with spilling gel coating.

Diamond spray cutters

Top 5 essential nozzles for beginner masters

List cutter for novice manicure includes:

  1. The cylinder drum due to the structure can replace other cutters. Its side surface works like a spherical nozzle, edge - like a truncated or inverted cone.
  2. In the arsenal of any master should be a nozzle penetrating under the side rollers - a needle with a diameter of 1.2 to 1.8 mm.
  3. A pointed cone is a golden middle of a cylinder and a fissure nozzle. The most comfortable milling milling rollers.
  4. Universal nozzle-grinder of the nail plate and cuticle - the corundum mill of low abrasiveness or silicone cap.
  5. Ceramic cutter-corn with small jazbins for spilling artificial materials, polishing flap skin of rollers.

Cutters for professionals

  • Character diamond milling cutter. Beginner users experience difficulties when working with it, because such a milling cutter during the processing of the cuticle often touched the hole of the nail. The nozzle has a different degree of abrasiveness and the diameter of the working surface - 23, 25, 27, 31 or 33 mm. Mill with a small diameter is treated with a coarse dry cuticle, a large ball is used with the final grinding of the separation space. The master chooses the nozzle based on the features of the nail client.
  • Ceramic "corn" with large notches. With insufficient power of the manicure apparatus, the nozzle vibrates, heats up, damages the nail plate. Cost cutters are more than 900 rubles.

Stiffness of the product

Abrasiveness is the ability to overtake the material with which it contacts. The product property gives particles, the diameter of which dictates the degree of rigidity of the tool and the area of \u200b\u200bits application: nail plate, leather or artificial material.

The particle diameter and abrasion cutter for manicure on the colors of the belt in diamond and ceramic products are determined.

  • Black-cutting products are designated in black. On the mega-tube nozzles have two belts. Products serve to heat the scorched nails, with natural nails and the skin cutter should not be in contact. Only for professional use.
  • Green belt indicates a spraying of coarse crumb. The product is used for spilling artificial coating, rough skin on hand and legs.
  • The cutter with a blue belt and the middle diameter of the crumb is designed to work with cuticle and rollers. The most common degree of abrasiveness.
  • Reds are fine particles. Cutters can contact with a natural nail plate, leather.
  • Yellow - extramodel particles that give the sawing surface minimum abrasiveness. The scope of the nozzle is similar.
  • White belt - product polishing nail.

Combined manicure

The manicure of one cutter using auxiliary tools is not fully hardware, so called combined.

His technique is simple: the cuticle is lifted by a non-needle tool, but a fluster, excessive skin around the nail spill with a pointed conical cutter. For processing Pesigi and nail polishing use a soft polishing pin.

How to choose cutters for hardware manicure

  • To base mills, without which it is difficult to perform a hardware procedure, include a cylinder, a cone, a needle and a grinding nozzle.
  • Beginner masters should be preferred by democratic diamond spraying nozzles. More wear-resistant and expensive are ceramic products.
  • At home, you can do with the tools of 4 types of stiffness: a white grinding nozzle, a red-adultery of pterigi, green - spilling cuticle and rollers, blue - filling artificial coatings, removing gel varnish.
  • Nozzles with black belt are not combined with homemade manicures with a number of revolutions up to 30 thousand / min: large jar of rotating on low speed can damage the nail plate.
  • Pay attention to the service life of the goods: the milling cutter at a decent level will not serve.
  • Products marked with a "T" icon are durable due to titanium coating.

Final choice

For full-fledged nail processing at home, you do not need to have nozzles of all forms and degrees of abrasiveness. It suffices to pay attention to the basic tools with popular parameters:

  • Red, blue, green belt indicating rigidity;
  • Cone-shaped, cylindrical and needle shape;
  • Material - metal with diamond spraying, carbide material or ceramics.

After mastering the main tools, it is easier to determine the requirements for missing mills.

Each milling cutter performs one stage of the nail hardware processing. Nozzles have a certain relief dictated by their point of application, the purpose of use, each of them cannot be evenly replaced by the adaptation of another form.

Modern nail treatment

- It is the processing of the nail plate and the separation space, performed using an electrical instrument (mill) and rotating cutters. A hardware manicure is carried out without cutting tools - scissors, bruises, trimmers.

Uneven "Skowning" of unwanted peeling around the nail in the process of edging manicure leads to hooks and damage to blood vessels. Electrical nail processing with cutter differs:

  • Low trauma: With the right nazhma, the nozzle spills the horny flakes, not traumating the viable layers of the cuticle with capillaries;
  • Forming a flat line of the nail hole in one touch;
  • The possibility of grinding, storming the cuticle, which is deprived of the edged manicure.

Varieties cutter for manicure and their purpose

Preparatory stage to hardware manicure

Includes removal of artificial coating (top, gel varnish, gel, acrylic for extension) and drying the working surface. At this stage, carbide or ceramic materials are used. Description cutter for hardware manicure:

Processing of Pesrygia and rollers

Which cutter to remove the cuticle at home:

How to remove rough skin

Materials for nozzles

  • Ceramic cutters For hardware manicure. Ceramics is used to remove rough skin of nail rollers, faster than other materials copes with an artificial coating. You can work with nozzles at low speed of rotation (up to 30 thousand revolutions).

Ceramic cutters

  • Carbide varieties of cuttersused when grinding cuticles and side rollers. Gel lacas at the preparatory stage they spill for a long time, but with a low probability of damage to the nail plate. This group includes budget steel mills without notes.

Carbide cutters

  • Diamond devices Contain a natural or artificial diamond crumb. Budget nozzles for beginner masters. Products with natural particles are used in pedicure, roller processing, with artificial - with spilling gel coating.

Diamond spray cutters

Top 5 essential nozzles for beginner masters

List cutter for novice manicure includes:

  1. The cylinder drum due to the structure can replace other cutters. Its side surface works like a spherical nozzle, edge - like a truncated or inverted cone.
  2. In the arsenal of any master should be a nozzle penetrating under the side rollers - a needle with a diameter of 1.2 to 1.8 mm.
  3. A pointed cone is a golden middle of a cylinder and a fissure nozzle. The most comfortable milling milling rollers.
  4. Universal nozzle-grinder of the nail plate and cuticle - the corundum mill of low abrasiveness or silicone cap.
  5. Ceramic cutter-corn with small jazbins for spilling artificial materials, polishing flap skin of rollers.

Cutters for professionals

  • Character diamond milling cutter. Beginner users experience difficulties when working with it, because such a milling cutter during the processing of the cuticle often touched the hole of the nail. The nozzle has a different degree of abrasiveness and the diameter of the working surface - 23, 25, 27, 31 or 33 mm. Mill with a small diameter is treated with a coarse dry cuticle, a large ball is used with the final grinding of the separation space. The master chooses the nozzle based on the features of the nail client.
  • Ceramic "corn" with large notches. With insufficient power of the manicure apparatus, the nozzle vibrates, heats up, damages the nail plate. Cost cutters are more than 900 rubles.

Stiffness of the product

Abrasiveness is the ability to overtake the material with which it contacts. The product property gives particles, the diameter of which dictates the degree of rigidity of the tool and the area of \u200b\u200bits application: nail plate, leather or artificial material.

The particle diameter and abrasion cutter for manicure on the colors of the belt in diamond and ceramic products are determined.

  • Black-cutting products are designated in black. On the mega-tube nozzles have two belts. Products serve to heat the scorched nails, with natural nails and the skin cutter should not be in contact. Only for professional use.
  • Green belt indicates a spraying of coarse crumb. The product is used for spilling artificial coating, rough skin on hand and legs.
  • The cutter with a blue belt and the middle diameter of the crumb is designed to work with cuticle and rollers. The most common degree of abrasiveness.
  • Reds are fine particles. Cutters can contact with a natural nail plate, leather.
  • Yellow - extramodel particles that give the sawing surface minimum abrasiveness. The scope of the nozzle is similar.
  • White belt - product polishing nail.

Combined manicure

The manicure of one cutter using auxiliary tools is not fully hardware, so called combined.

His technique is simple: the cuticle is lifted by a non-needle tool, but a fluster, excessive skin around the nail spill with a pointed conical cutter. For processing Pesigi and nail polishing use a soft polishing pin.